905-874-3297
170 Bovaird Dr W Unit #4, Brampton, ON L7A 1A1
National Loop
Vehicle Detection Loop Distributor
We supply National Loop vehicle detection loops to gate installers
Graft Gate Supply is an official National Loop dealer in Canada.
National Loop Company provides unique, durable driveway loop solutions. They have decades of experience dedicated to perfecting their loop product lines and they support a variety of different types of loop projects. Whether you are planning a new driveway, or need to install nominally intrusive loop products in an existing driveway, National Loop offers the perfect solution.
National Loop vehicle detection systems improve safety, simplify installation, and hold up in the ground.
VEHICLE DETECTION LOOPS
Detect vehicles accurately with inductive loop systems, loop detectors, and in-ground hardware designed to trigger gates safely and consistently.
These systems are built to pick up metal mass reliably, so gates open and close when they should. You get dependable performance for free exit, safety loops, and access control without false triggers or missed vehicles.
-
Inductive loop systems detect presence of metal vehicles
-
Supports free exit and safety loop functions
-
Works with EDI loop detectors and control systems
-
Does not detect pedestrians (vehicle-specific detection)
-
Compatible with most gate operators and access controls
Reliable vehicle detection at the gate
Use loop systems built with sealed conduit, protective materials, and rugged construction designed to handle traffic, tools, and weather.
Once installed, the system stays protected below the surface. It resists damage from moisture, corrosion, and jobsite wear, reducing the need for repairs or replacements over time.
-
Liquid-tight conduit construction (not exposed wire)
-
Resistant to moisture, corrosion, and ground movement
-
Withstands shovels and jobsite impact better than basic loops
-
Designed for long-term underground use
-
Available with 3M loop sealant for added protection
Durable in-ground hardware that lasts
Install cleanly with direct burial loops, saw-cut loops, or surface-mounted loops designed for fast placement in gravel, asphalt, or concrete.
You can match the install method to the site.
Whether you’re pouring new concrete or retrofitting an existing driveway, the loops are straightforward to place and connect without complicated setup.
-
Direct burial loops for gravel or new pours
-
Saw-cut loops for existing asphalt or concrete
-
Standard lead length: 50 ft (longer available)
-
Typical install depths: 6–10 inches (burial), ~1.5 inches (saw cut)
-
Compatible with loop sealants for finished installs
Simple installation for new or existing surfaces
Turn your gate vision into reality.
CONTACT US
Contact us for a personalized consultation, and we can set you up with everything you need for a perfect project.
